Dynex Network Card DX E202 User Manual

10/100Mb CardBus Network Card  
DX-E202  
USER GUIDE  
 
10/100Mb CardBus Network Card  
3
Important safety instructions  
Before getting started, read these instructions and save them for later reference.  
• Before you install your CardBus network card into your computer, read this user guide.  
In some operating systems, the driver must be installed before you install your card.  
• Do not drop or hit your network card.  
• Do not install your network card in a location that is subject to strong vibrations  
because vibration may damage your card.  
• Do not disassemble or try to modify your network card.  
• Disassembly or modification may void your warranty and could damage your network  
card leading to a fire or electric shock.  
• Do not store your network card in a damp location. Do not allow moisture or liquids to  
drip into your card. Liquids can damage your card leading to a fire or electric shock.  
• Do not insert metal objects, such as coins or paper clips, into your network card.  
• Your network card is for general computer use. Do not use your card in a computer that  
requires exceptional reliability, especially if a breakdown or malfunction of your card  
might jeopardize life or health, such as aerospace equipment, atomic power control  
systems, traffic-related equipment, transportation equipment, industrial robotics,  
combustion equipment, safety devices, and life-support systems.  
Features  
• Compliance with the IEEE802.3 (10 Base-T) and IEEE802.3u Fast Ethernet (100  
Base-TX) specifications  
• Support for full-duplex flow control (IEEE 802.3x) for improved performance  
• Support for auto-negotiation, which automatically selects IRQ and I/O addresses  
• Compliance with the PC Card type II and 32-bit CardBus standards  
• PC Card (68-pin) and Network (RJ-45) connectors  
• Hot-swappable, Plug-and-Play operation (you can insert or remove the card without  
turning off your computer.)  
• One LED to indicate network link and activity (the LED is ON when a link is established  
and flashes when data is being transferred.)  
• One LED to indicate duplex operation (the LED is ON when the card is operating in full  
duplex.)  
Package contents  
Make sure that the package contains the following items:  
• DX-E202 10/100Mb Cardbus Network Card  
• CD containing drivers and install guide  
• This installation guide  
 
     
DX-E202  
4
Installing the card  
Caution: Before touching any electronic components, make sure that you first touch an  
unpainted, grounded metal object to discharge any static electricity stored on your  
clothing or body.  
To install your card:  
1
2
3
Turn on your computer.  
Locate an available CardBus slot.  
Insert your network card into the slot.  
Windows finds the card and may automatically install a driver. However, for optimal  
performance, you should install the included driver.  
Note: Driver installation is not required for Mac OS X v10.4.0 or higher.  
To install the card driver:  
1
Insert the DX-E202 CD into your CD or DVD drive. The Dynex CardBus Network Card  
windows opens automatically.  
2
Click Install Driver to start the installation wizard.  
3
4
Click Next, then Finish when the wizard is complete.  
Click EXIT to close the Dynex CardBus Network Card window.  
For information about connecting your computer to a network, see Windows online help.  
 
 
10/100Mb CardBus Network Card  
5
Troubleshooting  
If you are having problems with your network, check the following:  
Verify network card installation  
If your card is not installed correctly, including the network system software or device drivers,  
your network will not function correctly.  
To verify that your card is correctly installed:  
1
Click Start, then right-click My Computer and click Properties. The System  
Properties window opens.  
2
Click the Hardware tab and click Device Manager. The Device Manager window  
opens.  
3
Double-click Network adapters to display the list of network adapters. You see  
Dynex DX-E202 CardBus 10/100Mb Network Adapter.  
If you see a yellow exclamation point or red "X" over the icon adjacent to Dynex DX-E202  
CardBus 10/100Mb Network Adapter your network card is not installed correctly or may have  
a problem. Double-click Dynex DX-E202 CardBus 10/100Mb Network Adapter to read  
the explanation of the problem. This information will be helpful if you need to contact Dynex  
technical support.  
 
 
DX-E202  
6
Verify cable connections  
• Make sure that the computer(s) you are troubleshooting are connected correctly.  
• The network card must be connected to the network with Category 5 UTP (unshielded  
twisted pair) cables.  
• Examine the network cables and make sure that they have not been damaged.  
• Make sure that no electromagnetic interference, like unshielded speakers or  
appliances on the same circuit, is affecting your network.  
• If you are using a hub, router, or switch, make sure that your network cables are not  
plugged into a dedicated Uplink port. The Uplink port is only used when connecting  
your hub to another hub or switch.  
Verify each computers indentification  
• Make sure that each computer on your network has a unique computer name.  
• Make sure that all the workgroup name is identical for all computers on your network.  
If one computer has a different workgroup name than the others, that computer will  
not appear in the same workgroup view.  
Verify indicators  
Your network card has indicators or lights that can give you information about your network  
traffic and help you determine problems when troubleshooting. The card has two indicators  
labeled Link/Act and Full Duplex. A steady green Link/Act light indicates a good connection  
with the switch. A flashing green Link/Act light indicates that the network card is sending or  
receiving data.  
When your computer is turned on and the network card is inserted into an open slot  
connector, a green light on the direct port LED indicator indicates that the card is linked to  
the network.If the LED remains dark without any apparent cause, check the network card  
installation.  
Pinging your network card  
PING is the acronym for Packet Internet Groper (PING), a utility to determine if a specific IP  
address is accessible. It works by sending a packet to the specified address and waiting for a  
reply. Ping is primarily used to troubleshoot Internet connections. By sending out a ping, you  
are verifying that a specific computer is available. Because all computers on the network  
must have a unique IP address, getting a reply means that a computer is on the network and  
that it can communicate.  
If the computers can communicate, the hardware and cabling are probably okay. If you  
cannot ping another computer, there is probably a problem with the hardware. Check the  
cabling and adapter installation. If you are unable to network, even when you receive a reply  
to your ping, there is probably a software configuration problem. Verify that all the settings  
are correct.  
 
10/100Mb CardBus Network Card  
7
To ping the network card:  
1
2
Click Start, then click Run. The Run dialog box opens.  
Type cmd in the Open box, then click OK. The command window opens.  
3
Type ping xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP address you want to  
ping). In this case, computer B with the IP address=192.168.0.1 is being pinged from  
computer A.  
4
5
Press Enter to begin pinging. If the connection is good, you receive four "Reply from"  
messages.  
Type exit at the prompt to return to Windows.  
Specifications  
Standards  
IEEE 802.3 10Base-T Ethernet  
IEEE 802.3u 100Base-TX Fast Ethernet  
ANSI/IEEE 802.3 NWay auto-negotiation  
PCMCIA 2.x  
Network media  
Ethernet: UTP Cat3, 4, 5, EIA/TIA-568 100-ohm  
Fast Ethernet: UTP Cat5, EIA/TIA-568 100-ohm  
CSMA/CD  
Protocol  
Host interface  
LEDs  
32-bit CardBus  
Link/Activity  
Full duplex  
Network data  
Transfer rate  
Ethernet: 10 MBps (half-duplex)  
Ethernet: 20 MBps (full-duplex)  
Fast Ethernet: 100 MBps (half-duplex)  
Fast Ethernet: 200 MBps (full-duplex)  
32°F~104°F (0°C~40°C)  
Operating temp  
Humidity  
Operating: 10%~90% RH, non-condensing  
Storage: 5%~90% RH, non-condensing  
Microsoft Windows 7, Vista, XP, 2000, and Mac OS X v10.4.0 or higher  
System support  
 
 
DX-E202  
8
Legal notices  
FCC Statement  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
• Consult the dealer or an experienced radio/ TV technician for help.  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two  
conditions:  
1)This device may not cause harmful interference.  
2)This device must accept any interference received, including interference that may  
cause undesired operation.  
Canada ICES-003 statement  
This Class B digital apparatus complies with Canadian ICES-003.  
Copyright  
© 2010 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise Services,  
Inc. Other brands and product names are trademarks or registered trademarks of their  
respective holders. Specifications and features are subject to change without notice or  
obligation.  
For service and support call (800) 305-2204.  
 
 
10/100Mb CardBus Network Card  
9
One-year limited warranty  
Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-E202  
(“Product”), that the Product shall be free of defects in the original manufacture of the  
material or workmanship for a period of one (1) year from the date of your purchase of the  
Product (“Warranty Period”). This Product must be purchased from an authorized dealer of  
Dynex brand products and packaged with this warranty statement. This warranty does not  
cover refurbished Product. If you notify Dynex during the Warranty Period of a defect covered  
by this warranty that requires service, terms of this warranty apply.  
How long does the coverage last?  
The Warranty Period lasts for one year (365 days) from the date you purchased the Product.  
The purchase date is printed on the receipt you received with the product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of the material or workmanship of  
the Product is determined to be defective by an authorized Dynex repair center or store  
personnel, Dynex will (at its sole option): (1) repair the Product with new or rebuilt parts; or  
(2) replace the Product at no charge with new or rebuilt comparable products or parts.  
Products and parts replaced under this warranty become the property of Dynex and are not  
returned to you. If service of Products and parts are required after the Warranty Period  
expires, you must pay all labor and parts charges. This warranty lasts as long as you own your  
Dynex Product during the Warranty Period. Warranty coverage terminates if you sell or  
otherwise transfer the Product.  
How to obtain warranty service?  
If you purchased the Product at a retail store location, take your original receipt and the  
Product to the store you purchased it from. Make sure that you place the Product in its  
original packaging or packaging that provides the same amount of protection as the original  
packaging. If you purchased the Product from an online web site, mail your original receipt  
and the Product to the address listed on the web site. Make sure that you put the Product in  
its original packaging or packaging that provides the same amount of protection as the  
original packaging.  
To obtain in-home warranty service for a television with a screen 25 inches or larger, call  
1-888-BESTBUY. Call agents will diagnose and correct the issue over the phone or will have  
an Insignia-approved repair person dispatched to your home.  
Where is the warranty valid?  
This warranty is valid only to the original purchaser of the Product in the United States,  
Canada, and Mexico.  
 
DX-E202  
10  
What does the warranty not cover?  
This warranty does not cover:  
• Customer instruction  
• Installation  
• Set up adjustments  
• Cosmetic damage  
• Damage due to acts of God, such as lightning strikes  
• Accident  
• Misuse  
• Abuse  
• Negligence  
• Commercial use  
• Modification of any part of the Product  
• Plasma display panel damaged by static (non-moving) images applied for lengthy  
periods (burn-in).  
This warranty also does not cover:  
• Damage due to incorrect operation or maintenance  
• Connection to an incorrect voltage supply  
• Attempted repair by anyone other than a facility authorized by Dynex to service the  
Product  
• Products sold as is or with all faults  
• Consumables, such as fuses or batteries  
• Products where the factory applied serial number has been altered or removed  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.  
DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE  
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT  
LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.  
DYNEX PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT,  
ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED  
TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH  
ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE  
WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW  
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY  
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO  
HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.  
Contact Dynex:  
For customer service please call 1-800-305-2204  
DYNEX® is a registered trademark of Best Buy Enterprise Services, Inc.  
Distributed by Best Buy Purchasing, LLC.  
Dynex, 7601 Penn Avenue South, Richfield, Minnesota, U.S.A.  
 
10/100Mb CardBus Network Card  
11  
 
© 2010 Best Buy Enterprise Services, Inc. All rights reserved.  
DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries.  
All other products and brand names are trademarks of their respective owners.  
Distributed by Best Buy Purchasing, LLC  
ENGLISH  
09-0760  
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.  
 

Compaq Network Card G200 User Manual
Cooper Lighting Landscape Lighting ANE50SR2554 User Manual
Cooper Lighting Work Light CU 1 R Series User Manual
Cuisinart Food Processor PG 32709 ESP User Manual
Cypress Computer Hardware Z9973 User Manual
Desa Water Heater PROPANE GAS LOG HEATER User Manual
Dyson Vacuum Cleaner PN25982 03 02 User Manual
Garland Food Warmer E24 12H User Manual
Gefen Flat Panel Television 4x4 HDTV Matrix User Manual
Gefen Switch EXT DVIKVM 841DL User Manual