Fellowes Laminator Titan 125 User Manual

125  
T
tan  
Please read these instructions before use.  
Lire ces instructions avant utilisation.  
Lea estas instrucciones antes del usarlo.  
E
F
S
 
LAMINATOR CONTROLS  
I
A
J
B
C
T
itan  
K
H
D
E
F
G
L
QUICK START GUIDE  
SETTING UP THE LAMINATOR  
1
2
3
4
STEPS TO LAMINATE  
5
6
7
8
9
10  
11  
12  
 
3
E
ENGLISH  
CAPABILITIES  
Performance  
Technical Data  
Entry width  
Estimated heat-up time  
Cool down time  
Lamination speed  
Laminating mechanism  
Ready indication  
Easy-Access open mechanism  
HeatGuard™ technology  
Clear Path  
12.5” / 317mm  
4 minutes  
30-60 minutes  
Voltage / Frequency /  
Current(Amps)  
Wattage  
120V AC, 60Hz, 8.5A  
1100 Watts  
Dimensions (WxDxH)  
variable - max. 35” / 90cm/min  
Belt-drive  
25” x 8.5” x 6.3” / 634 x 215 x 159mm  
22lb / 10 kg  
Net weight  
Light & beep  
Laminating capacity (max thickness)  
Max pouch thickness  
0.04”  
10 Mil. / 250 micron  
Yes  
Yes  
(total thickness = 2 x 10 = 20 Mil.)  
Yes  
Yes (30 mins)  
Yes  
Auto shut-off  
Photo-capable  
Carrier-free  
Yes  
IMPORTANT SAFETY INSTRUCTIONS  
CAUTION:  
Please read before use and keep for future reference.  
When laminating:  
- plug the machine into an easily accessible main socket.  
- to prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or main  
socket.  
- when working with very small pouch sizes (less than 3” / 75mm long) place the pouch within a carrier or on a sheet of paper.  
DO ensure the machine is on a stable surface.  
DO NOT use appliance if the power cord is damaged.  
DO test laminate scrap sheets before final laminations.  
DO remove staples and other metal articles prior to laminating.  
DO keep the machine away from heat and water sources.  
DO turn off the machine after each use.  
DO unplug the machine when not in use for an extended  
period.  
DO NOT attempt to open or otherwise repair the machine  
beyond the Easy-Access functions.  
DO NOT exceed the machines quoted performance.  
DO NOT allow children to use this machine without adult  
supervision.  
DO NOT laminate sharp or metal objects (eg: staples, paper  
clips).  
DO NOT laminate heat-sensitive documents (eg: tickets,  
ultrasounds etc).  
DO use pouches designed for use at the appropriate settings.  
DO keep away from pets, while in use.  
DO only use Fellowes Roller Wipes (CRC #57037) for internal  
cleaning.  
DO NOT laminate with self-adhesive pouches (which require a  
cold setting).  
DO NOT laminate an empty pouch.  
DO NOT use sharp objects to clean laminator.  
 
4
LAMINATOR CONTROLS  
A
B
C
Easy-Access opening cover  
Adjustable document entry guide  
Entry support shelf  
G
H
I
Selection buttons (up/down/left/right)  
Select / OK button  
Detachable document exit tray  
On/off switch (at rear)  
D
Reverse button  
J
E
F
Standby button  
K
L
Carry points (at sides)  
Ready LED  
LED user interface  
FEATURES & TIPS  
TitanTM operates at a fixed temperature. The user only needs to select the required pouch setting before laminating. There is no  
need to wait for the machine to warm-up or cool-down when switching between thick or thin pouch settings. Once the laminator  
has reached normal operating temperature, simply select the pouch thickness required and laminate immediately.  
FEATURES  
TIPS  
Always put item into the appropriate sized pouch.  
Always test laminate with a similar size and thickness  
before final process.  
If required, trim excess material from around the item  
after lamination and cooling.  
For best results, use Fellowes® brand laminating pouches:  
Enhance 3 Mil, Capture 5 Mil, Protect 7 Mil, Preserve 10  
Mil.  
‘Hot Swap’ function.  
The Hot Swap function enables the user to  
instantly switch between thick and thin pouch  
settings without any processing delays.  
Easy-Access open mechanism  
The Easy-Access mechanism allows user to safely  
and easily open the laminator for cleaning and  
maintenance.  
When working with different pouch thickness’ (tempera-  
ture settings) it is recommended to start first with the  
thinnest pouches.  
Prepare pouch and item for lamination. Center item in  
pouch against the leading sealed edge. Ensure the pouch is  
not too large for the item.  
HeatGuard™ technology  
Keeps the laminator surface up to 50% cooler  
and makes it more energy efficient then compa-  
rable laminators.  
SAFE TO TOUCH  
‘Safe Start’ function  
Please read these instructions before use.  
When switched on, the machine has a default  
‘Safe Start’ function which is set to the 3 Mil.  
setting. You may select other thickness settings  
as required.  
Power Save  
The Auto shut-down switches the machine off if it  
hasn’t been used for 30 mins to save energy.  
To return to the “Home” Menu at any stage, press  
the “Left/back” key on the navigation buttons.  
 
5
SETTING UP THE LAMINATOR  
1. Place the machine on a stable surface. Ensure enough  
clear space behind the machine to allow items to pass  
through freely.  
3. Plug the machine into an easily accessible main socket.  
4. To fully support pouches and items of different sizes  
use the adjustable entry guide to center the item  
before laminating. Place exit tray onto the rear of the  
machine.  
Connect the supplied power cord to the machine.  
2.  
STEPS TO LAMINATE  
5. Switch the power on (Power switch located at the rear  
9. Place item into open pouch. Center the item against  
the sealed front edge. Use the appropriate pouch size  
for the item.  
of the machine).  
6. Select the ‘Standby’ button on the control panel. The  
3 Mil. and ready LED’s will flash for 5 seconds before  
automatically selecting the 3 Mil. heat setting. Any  
setting can be selected at any time as required. Allow  
the machine to cool before opening.  
Place the pouch, sealed edge first into the document  
10.  
entry. Keep the pouch straight and centered within the  
document entry, not on an angle. Use the entry mark-  
ings as a guide.  
The LED interface allows selection of these functions:  
- 3, 4, 5, 7, 10 Mil. pouch settings  
- Manual laminating  
Upon exit, the laminated pouch is hot and soft. Take  
11.  
care and remove the pouch immediately. Place the  
pouch onto a flat surface to cool. This helps prevent any  
jamming.  
- Reverse  
- ‘Easy-Access’ for cleaning and maintenance.  
7.  
The laminator will automatically select the thinnest  
To reverse the laminating process at any stage, press  
12.  
pouch setting (3 Mil.) within 5 seconds of power-on  
unless another setting is selected. During warm-up or  
cool-down, the selected pouch setting will flash red.  
and hold the ‘Reverse’ button to eject the item. The  
laminator will sound alerts continuously and the ready  
LED will flash.  
When the laminator has reached the chosen setting, the  
LED will stop flashing and glow red. The machine will  
sound 2 short alerts.  
8.  
NEED HELP?  
Let our experts help you with a solution.  
Customer Service:  
Always call Fellowes before contacting your place of purchase.  
See back cover for useful telephone numbers.  
 
6
MAINTENANCE - Easy-Access™  
The TitanTM laminator can be opened manually by selecting the ‘open’ setting ( ) on the control panel.  
Please note: the power supply and the machine must both be ON to release the electronic safety catch.  
Select the ‘open’ setting  
The ready LED will  
flash and the machine  
will cool down. This  
may take between  
30-60 minutes.  
When the machine has  
cooled to a safe tempera-  
ture, the ready LED will  
stop flashing and an alert  
will sound.  
To open the top cover,  
move the levers on each  
side of the machine  
backwards to release the  
electronic safety catch.  
(
) using the naviga-  
tion buttons on the  
control panel. Press ‘OK’  
button.  
Lift the top cover with  
both hands. The lami-  
nating engine and  
belt-drive mechanism  
will be visible.  
To open the belt-drive  
Take care when cleaning  
any residue from the roll-  
ers. Fellowes laminator  
wipes (CRC# 57037) are  
recommended.  
IMPORTANT:  
mechanism, Pull the 2 cam  
levers forwards, on each  
side of the mechanism. The  
upper carriage can now  
be lifted upwards from the  
front. Lift the carriage and  
open fully until it stops in  
the rest position.  
When closing the mecha-  
nism, ensure the 2 cam  
levers are both pushed  
forwards to lock the belt-  
drive carriage correctly in  
position. The lid can be  
closed when the carriage  
is correctly locked.  
ADJUSTABLE ENTRY GUIDE  
The Entry Guide can be manually adjusted (especially for smaller documents) to ensure the  
items are best supported when inserted and helps avoid mis-feeds.  
INTEGRATED CARRY POINTS  
The TitanTM laminator has integrated carry points for safe and easy movement of the laminator  
– push in the flaps on both ends of the laminator to access them.  
 
7
WORLDWIDE WARRANTY  
Fellowes warrants all parts of the laminator to be free of defects in material and workmanship for 2 years from the date of  
purchase by the original consumer. If any part is found to be defective during warranty period, your sole and exclusive remedy will  
be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of abuse,  
mishandling or unauthorized repair. Any implied warranty, including that of merchantability or fitness for particular purpose,  
is hereby limited in duration to the appropriate warranty period set forth above. In no event shall Fellowes be liable for any  
consequential damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights  
that vary from this warranty. The duration, terms and conditions of this warranty are valid worldwide, except where different  
limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this warranty,  
please contact Fellowes or your dealer.  
PRODUCT REGISTRATION  
Thank you for purchasing a Fellowes product. Please visit www.fellowes.com/register to register your product and benefit from  
product news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside  
of the machine.  
STORAGE & EXTERNAL CLEANING  
Unplug the machine at the wall. Allow the machine to cool.  
The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine.  
Cleaning sheets (CRC# 53206) can be used with the machine. When the machine is warm, run the sheets through the machine to  
clean any residue off the rollers.  
 
8
TROUBLESHOOTING  
Problem  
Possible cause  
Solution  
Switch on machine at rear next to plug  
inlet and at the wall socket  
Move the machine to a cooler and  
dry area  
No ‘red’ power on LED  
Machine is not switched on  
Ready light does not come on after a  
long period  
Machine is in a hot or humid area  
Item may be too thick to laminate  
Thickness setting may be incorrect  
Pass through the machine again  
Check pouch thickness is correctly  
selected and pass through again  
Check pouch thickness is correctly  
selected and pass through again  
Pouch does not completely seal the item  
Pouch has waves or bubbles  
Pouch is lost in the machine  
Thickness setting may be incorrect  
Pouch is jammed  
Select reverse button and pull out the  
item by hand. Select the open machine  
setting and clean the rollers.  
Pouch was used ‘open end’ first  
Pouch was not centered on entry  
Pouch was not straight upon entry  
Empty pouch was used  
Jamming  
Pass cleaning sheets (CRC# 53206)  
through the machine to test and  
clean rollers. Select the open machine  
setting and clean the rollers with  
Fellowes roller wipes (CRC# 57037).  
Pouch is damaged after lamination  
Damaged rollers or adhesive on rollers  
Cannot open top cover to gain ‘Easy  
Access’  
Top cover locking screw is still located on the Remove the screw then open the lid  
left side of the machine  
as advised.  
Select ‘Easy Access’ and open the  
machine. Remove the pouch and  
laminate small pouches with a carrier  
or on a sheet of paper.  
Pouch may be too small to use without a  
carrier  
Small pouch is lost in the machine  
 
9
FCC CLASS B NOTICE  
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the  
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
CANADA CLASS B NOTICE - AVIS CANADA, CLASSE B  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
MODIFICATIONS  
Any modifications made to this device that are not approved by Fellowes may void the authority granted to the user by the FCC and/or  
by Industry Canada to operate this equipment.  
Toutes modifications apportées à ce dispositif et non approuvées par Fellowes annuleront le droit accordé à l’utilisateur par le FCC et/  
ou par Industrie Canada de faire fonctionner cet équipement.  
Fellowes  
Australia  
Benelux  
Japan  
+81-(0)-3-5496-2401  
+82-(0)-2-3462-2844  
+60-(0)-35122-1231  
+48-(22)-771-47-40  
+7-(495)-228-14-03  
+65-6221-3811  
+61-3-8336-9700  
+31-(0)-76-523-2090  
+1-905-475-6320  
Korea  
Malaysia  
Polska  
Canada  
Deutschland  
España / Portugal  
France  
+49-(0)-5131-49770  
+ 34 902 33 55 69  
+33-(0)-1-78-64-91-00  
+39-71-730041  
Russia  
Singapore  
United Kingdom  
United States  
+44-(0)-1302-836836  
+1-630-893-1600  
Italia  
 
404418  

Fostex Speaker PM SUBN User Manual
FujiFilm Digital Camera 6900 Zoom User Manual
Garmin Heart Rate Monitor 190 00972 93 User Manual
GE Air Conditioner 23 11 2129N 002 User Manual
GE Conference Phone 27950 User Manual
Generac Power Systems Portable Generator 005336 0 005337 0 User Manual
GE Refrigerator 162D9639P004 User Manual
GE Water System GXSF39E User Manual
Global Upholstery Co Computer Hardware 2807840 User Manual
Golden Technologies Mobility Aid GA 531 User Manual