Fujitsu Printer FTP 622MCL301 User Manual

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER  
2” MECHANISM, WITH CUTTER  
FTP-622MCL301/302  
OVERVIEW  
FTP-622MCL/FTP-622DCL/DSL Series is an ultra high speed line  
thermal printer driven by 24 VDC, printing on 2-inch wide paper  
(58 mm/60 mm).  
This printer is compact and light weight, and the design allows  
easy head maintenance, easy head cleaning and easy head  
replacement.  
This printer is suitable for a variety of applications, such as POS  
terminals, ticket machines, coupon machines, label printers,  
medical instruments, etc. A printer with a specially designed cutter  
FTP-622MCL301  
is also available.  
HIGHLIGHTS  
• Ultra high speed printing  
It can print at 80 mm/s (640 dotlines/s) maximum by using  
Fujitsu Components' unique head drive control.  
• Compact and lightweight  
This printer has a low profile of only 20 mm, and a light weight  
of approximately 81 g.  
• Low power consumption  
The peak current for head driving is approximately 2.3 A (at 80  
mm/s printing speed, 50% printing ratio).  
FTP-622CU101  
• Easy head access  
It is designed for easy head cleaning and head replacement.  
• Paper auto loading function  
Thermal paper can be loaded without head-up lever operation.  
• ESC/POSTM*1 Commands  
The commands conform to ESC/POSTM.  
• Auto Cutter  
Printer with auto cutter (full cut/partial cut) is also available.  
• UL Recognized  
File No.E171434  
FTP-622DCL011  
*1 ESC/POSTM is a registered trademark of SEIKO EPSON Corp.  
1
 
FTP-622MCL301/302  
(Continued)  
Item  
Specifications  
Part number  
Interface  
FTP-622MCL301/302  
Centronics (ESC/POSTM), RS232C  
24VDC ± 5%, Voltage  
2
Current : average*  
(
): Peak  
For head  
0.87 (1.16) A (at 80 mm/s printing speed, 25% printing ratio)  
0.63 (1.16) A (at 50 mm/s printing speed, 25% printing ratio)  
0.58 (0.58) A (at 30 mm/s printing speed, 25% printing ratio)  
Power supply  
For motor  
24VDC ± 5%, 1.0 A maximum  
24VDC ± 5%, 1.0 A maximum  
5VDC ± 5%, 0.5 A maximum  
101 (W) × 70 (D) × 42 (H) mm (w/cutter)  
131 (W) × 89 (D) × 24 (H) mm  
approximately 300 g (w/cutter)  
For cutter  
For logic  
Mechanism (cutter)  
Interface board  
Dimensions  
Weight (Mechanism+Cutter)  
Pulse durability : 1 × 108 pulse/dot (using Fujitsu's standard  
driving method)  
Mechanism  
Wear resistance: 50 km (at 25% printing ratio)  
Expected life  
Cutter  
3 × 105 cuts  
3
Operating temperature 0 to +50°C*  
Environmental  
conditions  
Operating humidity  
Storage temperature  
Storage humidity  
Head temperature  
Paper out/Mark detect  
Head-up  
20 to 85% RH (no condensation)  
–20 to +60°C (excluding paper)  
5 to 95% RH (no condensation)  
By thermistor (applied energy control, abnormal temperature detection)  
By photointerrupter  
Detection  
By microswitch  
For front insertion use (58 mm width)  
For rear insertion use (60 mm width)  
*Recommended papers  
· Oji Paper  
· NIPPON Paper  
· MITSUBISHI Paper Mills  
: FTP-020PU001,FTP-020P0701  
: FTP-020P0020,FTP-020P0702  
Recommended thermal sensitive paper  
: PD150R,PD160R,PD170R  
: TF50KS-E,TF60KS-E,TF60KJ-R  
: P220VBB-1,AFP-235  
*1: There may be exceptions.  
*2: 24VDC, minimum head resistance.  
*3: Guarantee: +5°C ~+40°C.  
3
 
FTP-622MCL301/302  
Mechanism with cutter  
MCL301  
(47.2)  
3-M3 FIXING HOLE FROM UPPER SIDE  
PAPER  
INSERTION  
MCL302  
PAPER  
INSERTION  
15  
±
300  
2-M 3 burring (FIXING HOLE FROM BOTTOM SIDE)  
45.0  
58.4(POSITIONING HOLE)  
(97.3)  
47.8±1  
(49.5)  
(78.6)  
Note: all dimensions are nominal value.  
Unit: mm  
4
 
FTP-622MCL301/302  
Interface board  
130.8  
120.7  
116.8  
87.6  
19.1  
5.1  
5.1  
CN2**  
CN5  
CN3  
4—ø3.6  
CN10  
CN11*  
CN13  
5.1  
5.1  
43.2  
86.4  
105.4  
120.7  
*CN11 on FTP-622DCL011/111 & 622DSL011/012/112 only  
**CN2 on FTP-622DSL only  
Unit: mm  
FUNCTION  
ITEM  
ITEM  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Test printing  
Paper-out detection  
8.  
9.  
Cutter trouble detection  
Motor power save  
Paper near end detection  
Head-up detection  
10.  
11.  
12.  
13.  
14.  
Mark detection  
MCU trouble detection  
Power on/off sequence protection  
Motor protection  
Abnormal temp. of thermal head detection  
Blown fuse detection  
Abnormal voltage detection of head  
Hardware timer  
INTERFACE, COMMAND, OPTIONS  
Please refer to the FTP-622DCL DATA SHEET and the FTP-622DSL DATA SHEET for Interface, Command, and  
Options.  
5
 
FTP-622MCL301/302  
Europe  
Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components  
International  
Headquarter  
Offices  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Asia Pacific  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#04-01 Citilink Warehouse Complex  
Singapore 118529  
Tel: (65) 375-8560  
Fax: (1-408) 745-4970  
Fax: (65) 273-3021  
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered  
trademarks of their respective owners. Rev. 09/2001  
6
 

EAW Stereo Amplifier CXA120 User Manual
Ecom Instruments Switch ECOM EF24F2G User Manual
Electro Voice Portable Speaker SH 1502ER User Manual
Excalibur electronic Home Safety Product H422 M User Manual
Fisher Price Motorized Toy Car 75548 User Manual
Five Star Ranges Range PN310 7BW User Manual
Frigidaire Air Conditioner 309000848 User Manual
Fundex Games Games Splash 500 User Manual
GE Monogram Cooktop ZGU36L6D User Manual
Golden Technologies Mobility Scooter GB116 User Manual