Fujitsu Printer FTP 644MCL001 User Manual

BATTERY DRIVE, FTP-604 Series  
4” TYPE MECHANISM AND INTERFACE BOARD  
FTP-644MCL001/002/FTP-624DCL/DSL  
OVERVIEW  
FTP-644MCL/FTP-624DCL/DSL Series is a high speed line  
thermal printer driven by battery, printing on 4-inch wide paper  
(112 mm/ 114 mm).  
The printer is compact and lightweight, and the design allows  
easy head maintenance, head cleaning and head replacement.  
This printer is suitable for a variety of applications, such as hand  
held terminals, POS terminals, ticket machines, coupon  
machines, label printers, etc.  
FTP-644MCL001  
HIGHLIGHTS  
• High speed printing  
It can print at 50 mm/s (400 dotlines/s) maximum by using  
Fujitsu Components' unique head drive control.  
• Compact and lightweight  
The printer has a low profile of only 20 mm, and a light weight  
of approximately 125 g.  
• Low power consumption  
The peak current for head drive is only 3.5 A (8.5VDC, 128  
dots on).  
FTP-624CU102  
• Easy head access  
It is designed for easy head cleaning and head replacement.  
• Paper auto loading function  
Thermal paper can be loaded without head-up lever  
operation.  
• UL recognized  
File No. E171434  
FTP-624DCL/DSL002  
1
 
FTP-644MCL001/002/FTP-624DCL/DSL002  
(Continued)  
Item  
For head  
Specifications  
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)  
Peak current: approx. 3.5 A (conditions: room temp., 7.2VDC, 128 dots on)  
Power  
supply  
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)  
Peak current: approx. 0.8 A (conditions: room temp., 7.2 VDC)  
For motor  
For logic  
Voltage: 5 VDC ± 5%  
Current: 0.2 A maximum  
Mechanism  
138 (W) × 46 (D) × 20 (H) mm (excluding lever and knob diameter)  
131 (W) × 89(D) × 24 (H) mm  
Dimensions  
Interface board  
Weight (Mechanism)  
approximately 125 g  
Expected life  
Mechanism  
Pulse durability: 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard  
driving method)  
Wear resistance: 50 km (at 12.5% print ratio)  
Operating temperature  
0 to +50°C*2  
Environmental  
conditions  
Operating humidity  
Storage temperature  
Storage humidity  
Head temperature  
Paper out/Mark detect  
Head-up  
20 to 85% RH (no condensation)  
–20 to +60°C  
5 to 95% RH (no condensation)  
By thermistor (applied energy control, abnormal temperature detection)  
By photointerrupter  
Detection  
By microswitch  
For front insertion use (112 mm width) : FTP-040PU001, FTP-040PG021  
For rear insertion use (114 mm width) : FTP-040P0020, FTP-040PG106  
In Europe (112 mm width)  
· Oji Paper  
· NIPPON Paper  
· MITSUBISHI Paper Mills  
:FTP-041P0060-45  
Recommended thermal sensitive paper  
: PD160R, PD170R, PD150R  
: TF50KS-E4, TF60KS-E,TF50KS-E  
: P220VBB-1, AFP-235  
*1: There may be exceptions.  
*2: Guarantee +5°C to +40°C.  
3
 
FTP-644MCL001/002/FTP-624DCL/DSL002  
DIMENSIONS  
Printer mechanism  
PAPER INSERTION  
(MCLOO1)  
20.1  
HEAD UP LEVER (AT HEAD DOWN)  
CENTER OF PAPER  
PAPER INSERTION  
(MCLOO2)  
HEAD CONNECTOR  
65.7  
71.8±1  
(137.5)  
Unit: mm  
4
 
FTP-644MCL001/002/FTP-624DCL/DSL002  
Interface board  
130.8  
120.7  
105.4  
71.1  
33.0  
5.1  
5.1  
15.2  
CN5  
CN12  
CN9  
CN10  
CN11  
59.7  
CN2  
CN1  
CN4  
5.1  
5.1  
73.7  
4-03.6  
86.4  
105.4  
114.2  
120.7  
Mounting Height  
Mounting Height  
* CN9 on FTP-624DSL only  
Unit: mm  
** CN8, CN11, CN12 not used  
FUNCTION  
ITEM  
ITEM  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Test printing  
8.  
9.  
Motor power save  
Mark detection  
Paper-out detection  
Paper near end detection  
Head-up detection  
10.  
11.  
12.  
13.  
MCU trouble detection  
Power on/off sequence protection  
Motor protection  
Abnormal temp. of thermal head detection  
Blown fuse detection  
Hardware timer  
Abnormal voltage detection of head  
5
 
FTP-644MCL001/002/FTP-624DCL/DSL002  
CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM  
1. Thermal Head  
Head side 1 : B11B-PH-K-S-2.2 (J.S.T.) or equivalent  
2: B10B-PH-K-S-2.2 (J.S.T.) or equivalent  
Board side 1: PHR-11 (J.S.T.) or equivalent  
2: PHR-12 (J.S.T.) or equivalent  
Connector Thermal Head 1  
No. Signal Comment  
Connector Thermal Head 2  
No. Signal Comment  
1
2
STB5 Print enable signal 5  
STB6 Print enable signal 6  
STB7 Print enable signal 7  
STB8 Print enable signal 8  
1
2
VH  
VH  
Power for head  
Power for head  
3
3
GND Head ground  
GND Head ground  
4
4
5
CLK  
LAT  
DIN  
Data transmission clock  
Print data latching signal  
Print data output signal  
5
TH*1  
Temperature detection  
6
6
STB1 Print enable signal 1  
STB2 Print enable signal 2  
STB3 Print enable signal 3  
STB4 Print enable signal 4  
VDD Power for logic  
7
7
8
GND Head ground  
GND Head ground  
8
9
9
10  
11  
VH  
VH  
Power for head  
Power for head  
10  
*1: Symbol: " " means a negative logic signal  
Thermal head heat sink  
Head up level  
Motor  
1, 2, 3, ...............9, 10  
1, 2, 3, ...............10, 11  
Connector Pin No.  
3. Sensor connectors  
Sensor  
: PHR-5 (J.S.T.) or equivalent  
Board side : B5B-PH-K-S (J.S.T.) or equivalent  
No. Signal Comment  
No. Signal Comment  
1
2
3
4
B
B
A
A
Stepping motor coil excitation  
Stepping motor coil excitation  
Stepping motor coil excitation  
Stepping motor coil excitation  
1
2
3
4
5
VSEN Power for paper sensor  
PHE Photo interrupter emittor  
PHK Photo interrupter cathode  
SW1 Head up detect switch 1  
SW2 Head up detect switch 2  
6
 
FTP-644MCL001/002/FTP-624DCL/DSL002  
Europe  
Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components  
International  
Headquarter  
Offices  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Asia Pacific  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#04-01 Citilink Warehouse Complex  
Singapore 118529  
Tel: (65) 6375-8560  
Fax: (1-408) 745-4970  
Fax: (65) 6273-3021  
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered  
trademarks of their respective owners. Rev. 11/15/2004.  
7
 

Electro Voice Speaker System HP9040 User Manual
Foundations Baby Furniture 100 EH User Manual
Gaggenau Electric Steamer VK230610 User Manual
Garmin GPS Receiver 182 182C User Manual
GE Air Conditioner AZ41E09DAC User Manual
GE Clothes Dryer GFDS355GL User Manual
Gemini Musical Instrument PS 850i User Manual
GE Monogram Ice Maker ZDI15CBB User Manual
GE Washer WA9895S User Manual
Global Machinery Company Work Light VEC156 AU User Manual