GE Monogram Beverage Dispenser ZDWG240 User Manual

Owners  
Manual  
Wine Chiller  
ZDWG240  
 
Consumer Information  
Wine Chiller  
The warranty does not cover damage  
caused after delivery.  
Immediately contact the dealer (or builder)  
that sold you the wine chiller.  
If you received  
a damaged  
appliance  
Before using, be sure all packing materials  
and tape have been removed.  
new appliances is an application of  
Remove  
packaging  
household liquid detergent. Apply with a  
soft cloth and allow to soak. Wipe dry and  
then apply an appliance polish to  
To assure no damage is done to the finish  
of the product, the safest way to remove  
the adhesive left from packaging tape on  
thoroughly clean and protect the surface.  
• Promptly inspect your new Monogram  
Wine Chiller. If it has been damaged,  
contact the Installer or Dealer  
immediately.  
Test the door swing. Carefully open and  
close the door. The door should not rub  
or catch on adjacent cabinetry. Notify the  
installer if the door makes contact with  
cabinetry.  
After  
installation  
is completed  
• This Wine Chiller must be properly  
leveled to ensure correct door alignment Please Contact the Installer or Dealer if  
and door closure. Contact the Installer  
if the unit is not level.  
you experience any of these problems.  
Your Wine Chiller is shipped with a black  
toekick on the front of the unit. For  
• The unit should be centered in the  
opening. The front face of the door  
should be 25 mm forward of adjacent  
cabinetry. Contact the installer if  
clearance is not correct.  
shipping purposes, an optional stainless  
steel toekick is secured to the back of the  
unit. That toekick should have been  
removed and installed, or given to you.  
Keep the unused toekick and other unused  
or removed parts for possible future use.  
3
 
IMPORTANT SAFETY INSTRUCTIONS  
READ AND SAVE THESE INSTRUCTIONS  
• Unplug your refrigerator before cleaning  
and making repairs. NOTE: We strongly  
recommend that any servicing be  
wWARNING:  
When using  
electrical appliances, basic safety precautions  
should be followed, including the following:  
performed by a qualified individual.  
• Use this appliance only for its intended  
purpose as described in this Owner’s  
Manual.  
• Before replacing a burned-out light bulb,  
the refrigerator should be unplugged  
in order to avoid contact with a live  
wire filament. (A burned-out light  
bulb may break when being replaced.)  
NOTE: Setting the refrigerator  
• This refrigerator must be properly  
installed in accordance with the Installation  
Instructions before it is used. Also see the  
How to Connect Electricity section.  
temperature controls to OFF does not  
remove power to the light circuit.  
• Do not allow children to climb, stand or  
hang on the shelves in the refrigerator.  
They could damage the refrigerator and  
seriously injure themselves.  
This appliance has a refrigerating system  
filled with R600a (isobutane) refrigerant,  
so bear in mind:  
• Leave servicing to an authorized expert.  
• Be careful not to obstruct any air vents.  
• Do not store or use gasoline or other  
flammable vapors and liquids in the  
vicinity of this or any other appliance.  
• Never use or store electric appliances  
in the refrigerator compartment.  
• Do not attempt to stand on top of the  
refrigerator. Doing so may result in  
bodily injury or damage to the  
refrigerator.  
• Never clean the appliance with  
sharp objects, as you may damage  
the refrigerating system.  
• Do not allow children to play with the  
refrigerator or tamper with the controls.  
wWARNING:  
Do not use  
mechanical devices or other artificial  
means to accelerate the defrosting  
process, other than those recommended  
by the manufacturer.  
• Keep fingers out of the “pinch point”  
areas: clearances between the doors  
and between the doors and cabinet are  
necessarily small. Be careful closing  
doors when children are in the area.  
wDANGER: RISK OF CHILD ENTRAPMENT  
Child entrapment and suffocation are not  
Before You Throw Away Your Old  
problems of the past. Junked or abandoned Refrigeration Product:  
refrigeration products are still dangerous…  
Take off the doors and discard separately.  
even if they will sit for “just a few days.”  
If you are getting rid of your old appliance, Leave the shelves in place so that  
please follow these instructions to help  
prevent accidents.  
children may not easily climb inside.  
If the refrigerator has a lock, make it  
unusable.  
REFRIGERANTS  
All refrigeration products contain  
If you are getting rid of an old refrigeration  
product, check with the company handling  
the disposal about what to do.  
refrigerants, which under federal law must  
be removed prior to product disposal.  
4
 
IMPORTANT SAFETY INSTRUCTIONS  
HOW TO CONNECT ELECTRICITY  
The power cord of this appliance is  
equipped with an earthing plug which  
mates with a standard earthed wall outlet  
to minimize the possibility of electric  
shock hazard from this appliance.  
IMPORTANT: The refitting of electric  
plugs and cables should be done by a  
qualified technician or service agent.  
In some countries the refitting of electric  
plugs and cables is only permitted when  
the work is completed by a qualified  
technician.  
Have the wall outlet and circuit checked  
by a qualified electrician to make sure  
the outlet is properly earthed.  
If the power supply cord becomes damaged,  
it must be replaced by a qualified service  
agent in order to avoid a safety hazard.  
Where an unearthed wall outlet is  
encountered, it is your personal  
responsibility and obligation to have  
it replaced with a properly earthed  
wall outlet.  
Never unplug your refrigerator by pulling  
on the power cord. Always grip plug firmly  
and pull straight out from the outlet.  
Insure proper  
Repair or replace immediately all power  
cords that have become frayed or otherwise  
damaged. Do not use a cord that shows  
cracks or abrasion damage along its length  
or at either end.  
The refrigerator  
earthing exists  
should always be  
before using.  
plugged into its own  
individual electrical  
outlet. This provides  
the best performance  
and also prevents  
When moving the refrigerator away from  
the wall, be careful not to roll over or  
damage the power cord.  
Earthing plug  
overloading house  
wiring circuits which  
could cause a fire  
Mains lead replacement  
hazard from overheated  
If the mains lead on your refrigerator  
needs replacing at any time, it must be  
replaced by a special lead which is  
obtainable from your local dealer. A charge  
will be made for the replacement of the  
mains lead if you have damaged the lead.  
wires. Please refer to  
the rating plate on the  
refrigerator for the correct voltage, wattage  
and frequency. If the product plug does  
not fit your outlet, the product should be  
fitted with a new plug.  
The refrigerator must be positioned so that  
the plug is accessible.  
SAVE THESE INSTRUCTIONS  
5
 
Controls and Features  
Wine Chiller  
Do not install the wine chiller where  
the ambient temperature will go below  
55°F (13°C) or above 90°F (32°C).  
Temperatures at the bottom of the cabinet  
will be cooler than temperatures at the top  
of the cabinet.  
Temperature  
control  
The RED WINE setting will provide a  
storage temperature of approximately  
55ºF (13ºC), which is optimum for the  
storage for red wine.  
Position your wine inventory accordingly  
(i.e. white wines in the cooler zones and  
red in the warmer zones).  
To set the control, turn it to the RED  
WINE setting. Once the bottles are loaded,  
allow at least 24 hours before making any  
adjustments to the initial setting.  
The WHITE WINE setting will provide  
a storage temperature of approximately  
7ºC, which is optimum for white wine.  
As with any refrigeration product, there is  
a slight temperature variance at different  
locations within the cabinet.  
The interior light makes it easy to view  
your wine labels and enhances the display  
of your collection.  
position, the light remains on continuously  
for your maximum viewing pleasure.  
For best viewing do not store a bottle on  
the top shelf directly under the light.  
Remember to turn off the light when it  
is no longer needed.  
Interior light  
and switch  
When the switch is in the OFF position,  
the light comes on only when the door is  
opened. When the switch is in the ON  
All of the full extension drawers pull out  
so bottles can be conveniently added or  
removed.  
Removing  
full extension  
drawers  
Tab (push tab down on  
right drawer guide, pull  
tab up on left drawer  
guide)  
Any of the full extension drawers can be  
removed to store larger bottles.  
To remove:  
1. Pull the full extension drawer out to the  
STOP position.  
2. Push the tab on right drawer guide  
down while pulling the tab on left guide  
up, and pull the drawer out.  
To replace:  
To replace, push drawer slide  
arm back into unit  
Pull small slide sub assembly  
completely forward  
1. Push the drawer slide arm back into  
the unit.  
2. Pull the small slide sub assembly  
NOTE: Make sure the tabs on the full  
extension drawer guides are fully engaged  
before loading any bottles. Pull the drawers  
out all the way to the STOP position and  
push back in several times to make sure  
locking tabs are properly engaged.  
completely forward.  
3. Insert the sides of the drawer back into  
the guides.  
4. Push until the tabs lock into place.  
6
 
Operating Instructions  
Wine Chiller  
The top five full extension drawers each  
The bottom two full extension drawers  
Insert  
wine bottles  
hold eight bottles, two deep with the necks hold six bottles each and are loaded with  
alternating front to back or nine bottles,  
alternating with necks pointing inward.  
necks facing the rear. Tall bottles should  
not be loaded on the bottom drawer  
because they may prevent the door from  
closing.  
8 bottle arrangement  
9 bottle arrangement  
Bottom drawer  
The bottles on the top full extension  
drawer, directly under the light, will be  
exposed to a slightly higher temperature  
when the light is on. Position your wines  
accordingly and remember to turn off  
the light when it is no longer needed.  
Do not allow children to climb, stand or  
hang on the wine chiller full extension  
drawers. They could seriously injure  
themselves and possibly cause damage  
to the wine chiller.  
Loading  
tips and  
suggestions  
Keep wines that you plan to use for  
everyday drinking and entertaining on  
the front half of the full extension  
drawers where labels are completely  
visible. Place wines for aging or longer  
term storage in the rear.  
The full extension drawer fronts on the  
wine chiller are unfinished cherry wood.  
During use, oil from hands may  
Apply the stain and sealer according to  
the manufacturer’s instructions. To avoid  
unpleasant odor, keep the door open to  
ventilate and allow the stain/sealer to dry  
completely before using the product.  
Wood drawer  
fronts  
accumulate and stain the wood.  
The drawer fronts may be stained and  
sealed to match adjacent cabinetry. The  
tinted glass will make the stained wood  
appear darker. A true color match can be  
seen only when the door is opened.  
NOTE: Natural wood may vary slightly in  
grain and color.  
7
 
Care and Cleaning  
Wine Chiller  
Unplug the wine chiller before cleaning.  
Turn the wine chiller unit OFF or unplug  
the unit before cleaning. Use a slightly  
damp cloth or sponge when cleaning  
around switches, lights or controls.  
Other parts of the wine chiller center  
unit—including the door gaskets, and  
full extension drawers—can be cleaned  
the same way.  
Cleaning  
the inside  
Use warm water and baking soda  
solution— about a tablespoon (15 ml) of  
baking soda to a quart (1 liter) of water.  
This both cleans and neutralizes odors.  
Thoroughly rinse and wipe dry.  
Periodically check the drain hole and  
channel for any debris. If the drain is  
blocked, condensation will not drain  
properly.  
Drain hole  
Drain hole  
To check and clean the drain hole,  
remove the third and fourth drawers  
(see instructions on Removing full extension  
drawers on page 6). Sweep a damp cloth  
along the channel in the back of the wine  
chiller. Use a finger to sweep away any  
debris from the drain hole.  
The exterior surfaces can be washed with  
mild soap and water.  
Cabinet  
Rinse thoroughly with clear water. Never  
use abrasive scouring powders.  
Use a glass cleaner or mild soap and water  
and a soft cloth to clean the glass door.  
Do not use any abrasive powders.  
Avoid cleaning cold glass with hot water  
because the extreme temperature  
difference may cause it to break. Rough  
handling of tempered glass can cause it  
to shatter.  
Glass door  
The vinyl gasket may be cleaned with mild  
soap and water, a baking soda solution or  
a mild scouring powder. Rinse well.  
After cleaning the door gasket, apply a thin  
layer of paraffin wax or petroleum jelly to  
the door gasket at the hinge side. This  
helps keep the gasket from sticking and  
bending out of shape.  
Door gasket  
8
 
Care and Cleaning  
Wine Chiller  
Unplug the wine chiller before cleaning.  
Unplug the wine chiller before replacing  
the light bulb.  
Light bulb  
replacement  
To remove the light shield, push in the tab  
on the left side of the shield and lower it.  
Replace with a 15 watt appliance bulb.  
If the power fails, open the door as  
infrequently as possible to maintain  
the temperature. A gradual rise in  
temperature should not have any  
adverse effect on the wine.  
If it is extremely hot, you may want to  
move the wine to the coolest location you  
can find until power is restored.  
In the event  
of a power  
failure  
Do not store or use gasoline or other  
flammable vapors and liquids in the  
vicinity of this or any other appliance.  
9
 
Built-In Dimensions  
Wine Chiller  
The wine chiller can be a free-standing  
model or can be built in using the cut-out  
dimensions below.  
When building in the wine chiller, be sure  
to allow for a full door swing so you have  
full access to the pull-out drawers.  
Installation  
dimensions  
See the Installation Instructions for  
complete directions.  
603 mm  
603 mm  
876 mm  
NOTE:  
Cut-out dimensions:  
Handle and handle standoff  
depth is 45 mm  
Height: 875–890 mm  
Width: 603 mm minimum  
Depth: 610 mm minimum  
90° Door Swing  
360 mm Min.  
to Wall  
The wine chiller is factory set for a 110°  
door swing.  
Product  
clearances  
530 mm  
600 mm  
When installed in a corner:  
Allow 100 mm minimum clearance on  
the hinge side for the 90° door swing  
and to allow racks to slide out.  
Allow 360 mm minimum clearance on  
the hinge side for a full 110° door swing.  
90°  
110°  
The door swing is reversible on all models.  
If desired, change the door swing before  
installation.  
100 mm Min.  
to Wall  
Choose the location:  
Black or Stainless Steel Toekick Options  
These products may be closed in on the  
top and three sides as long as the front  
is unobstructed for air circulation and  
proper access to the door.  
These products are shipped with a black  
toekick installed. An optional stainless steel  
toekick is also supplied with each product.  
For shipping purposes, the stainless steel  
toekick is secured to the back of the unit.  
Do not install these products where the  
temperature will go below 55°F (13°C)  
or above 90°F (32°C).  
Do not install where it will be subject to  
direct sunlight, heat or moisture.  
10  
 
Reversing the Door Swing  
Wine Chiller  
Parts included:  
To reverse  
the door  
Install  
3 Hinge  
Screws  
1. Top left case hinge  
Remove  
Top Hinge  
2. Bottom left case hinge  
3. Left and right side decorative  
hinge cover  
4. Decorative hinge screw hole cover  
5. Torx® driver bit  
Hinge  
Pin and  
Bracket  
Door Stop  
and Cam Riser  
Tools required:  
1. Phillips screwdriver  
2. Electric drill  
To remove the door:  
1. Flatten the shipping carton to use as  
Remove  
Hinge  
a pad.  
2. Remove the 2 screws and the toekick.  
Set aside the screws and toekick for  
final installation.  
3. Place the door onto the bottom case  
hinge.  
3. Use the supplied Torx® bit and electric  
drill to remove the 3 screws holding  
the top case hinge. Lift off the hinge.  
(Screws will be used to install the new  
hinge.)  
4. Install the supplied left-hand top case  
hinge with the 3 original screws.  
5. Select the hinge cover marked with  
an “L”.  
6. Peel backing off the tape inside the  
4. Lift the door off the bottom case hinge.  
decorative hinge cover.  
5. Remove the bottom case hinge pin and  
7. Press and snap the  
hinge cover into  
place.  
Install Covers  
bracket.  
Rotate the door:  
8. Snap the screw hole  
cover into place on  
the opposite side.  
The handle will be on the right side of  
the door; hinges will be installed on the  
left side of the case.  
IMPORTANT: Check to be sure screws are  
tight and that the door is straight and does  
not sag. The door should swing freely.  
1. Remove the door stop and cam riser  
on the original bottom right side of  
the door.  
NOTE: See Installation Instructions to  
apply hinge cover and screw hole cover.  
2. Remove the fill plug on the top right  
side of the door.  
Position nameplate:  
3. Turn the door over and reinstall the  
fill plug on the new left side.  
Apply the Monogram nameplate on the  
door using the template included in the  
installation instructions.  
To reinstall the door:  
1. Install the original door stop and  
cam riser onto the bottom left side  
of the door.  
2. Install the new supplied bottom case  
hinge pin and bracket onto bottom  
left side.  
11  
 
The Problem Solver  
Wine Chiller  
PROBLEM  
POSSIBLE CAUSE  
Questions?  
Use this  
problem  
solver!  
APPLIANCE  
DOES NOT OPERATE  
• Appliance may be in defrost cycle when motor does not operate for  
about 30 minutes.  
• If interior light is not on, appliance may not be plugged in at  
wall outlet. Push the plug completely into the wall outlet.  
• The fuse is blown/circuit breaker is tripped. Replace fuse or reset  
the breaker.  
VIBRATION OR  
• Adjust the leveling legs as shown in the Installation Instructions.  
RATTLING (Slight  
vibration is normal.)  
MOTOR OPERATES  
FOR LONG PERIODS  
OR CYCLES ON AND  
OFF FREQUENTLY  
• Normal when appliance is first plugged in. Wait 24 hours for the  
appliance to completely cool down.  
• Often occurs when large amounts of beverages are placed in appliance.  
This is normal.  
• Door left open or package holding door open.  
• Hot weather or frequent door openings. This is normal.  
Temperature control set at the coldest setting.  
See Temperature Control. Allow 24 hours for temperature to change.  
COMPARTMENT  
TOO WARM  
Temperature control not set cold enough.  
See Temperature Control. Allow 24 hours for temperature to change.  
• Warm weather or frequent door openings.  
• Door left open for long time.  
• Package may be holding door open.  
APPLIANCE  
HAS ODOR  
• Interior needs cleaning. See Care and Cleaning.  
• Keep open box of baking soda in appliance; replace every 3 months.  
DOOR NOT  
CLOSING  
• Door gasket is sticking or folding over. Apply petroleum jelly  
or paraffin wax to the face of the gasket.  
PROPERLY  
• The door is hitting an internal component inside the appliance.  
Adjust interior components to prevent interference.  
MOISTURE FORMS  
ON OUTSIDE OF  
APPLIANCE  
• Not unusual during periods of high humidity. If bothersome,  
wipe surface dry; otherwise, moisture will evaporate in time.  
• Door left open or package holding door open.  
FROST OR MOISTURE • Too frequent or too long door openings.  
COLLECTS INSIDE  
• In humid weather, air carries moisture into appliance when door  
is opened. Unit will dissipate moisture in time. If bothersome,  
wipe surface dry.  
Temperature control set at coldest setting.  
INTERIOR LIGHT  
DOES NOT WORK  
• No power at outlet.  
• Light bulb needs replacing. See Care and Cleaning.  
197D4615P004  
49-60324  
02-04 JR  
Printed in Slovenia  
 

EdgeStar Air Conditioner AP14000W User Manual
Eiki Projector LC SB1 User Manual
FujiFilm Digital Camera ZOOMDATE115S User Manual
Fundex Games Games Top Toss Pro User Manual
Gaggenau Oven EB 204 205 User Manual
GE Mouse HO97663 User Manual
GE Water System GX1S50F User Manual
Gianni Industries Door 10020 User Manual
Gianni Industries Switch CP 24G User Manual
Global Machinery Company Lawn Mower HM 350C User Manual